Phone (1)
01Before you startПеред установкой
- Nothing Phone (1).
- Stock Nothing OS 3.2 V3.2-260618-1045 (the latest for Phone (1)): the package keeps the phone's firmware and modem, they have to be from this version.
- An unlocked bootloader. Unlocking erases all data.
- A computer with Windows, macOS or Linux, a USB cable and Android SDK Platform-Tools (adb and fastboot).
- Nothing Phone (1).
- Сток Nothing OS 3.2 V3.2-260618-1045 (последняя для Phone (1)): прошивки и модем телефона пакет не трогает, они должны быть от этой версии.
- Разблокированный загрузчик. Разблокировка стирает все данные.
- Компьютер с Windows, macOS или Linux, USB-кабель и Android SDK Platform-Tools (adb и fastboot).
The same NothingExtended as on Phone (2), on top of the Phone (1) vendor side: a kernel rebuilt from Nothing's sources with root built in, 32-bit runtime for the vendor's HALs, the stock camera and Glyph support.
Тот же NothingExtended, что на Phone (2), поверх vendor-части Phone (1): ядро, собранное из исходников Nothing со встроенным root, 32-битный рантайм для HAL vendor, родная камера и поддержка Glyph.
02InstallУстановка
-
Back up your dataСохраните данные
Unlocking the bootloader and installing from stock erase everything on the phone.
Разблокировка загрузчика и установка со стока стирают с телефона всё.
-
Unlock the bootloaderРазблокируйте загрузчик
Settings → About phone: tap the build number 7 times. In Developer options turn on OEM unlocking and USB debugging, connect the phone and run the commands below, then confirm on the phone. Skip if it is unlocked already.
Настройки → О телефоне: 7 раз нажмите на номер сборки. В разделе «Для разработчиков» включите «Заводскую разблокировку» и «Отладку по USB», подключите телефон, выполните команды ниже и подтвердите на телефоне. Если загрузчик уже разблокирован, пропустите шаг.
adb reboot bootloader
fastboot flashing unlock
-
Unpack the package, boot into the bootloaderРаспакуйте пакет, переведите телефон в bootloader
Windows: put the
platform-toolsfolder next toflash-all.bat. Thenadb reboot bootloader, or power off and hold Volume Down + Power.Windows: положите папку
platform-toolsрядом сflash-all.bat. Затемadb reboot bootloaderили выключить телефон и зажать Громкость вниз + Питание. -
Run the installerЗапустите установку
flash-all.bat
bash flash-all.sh
Type
YESwhen asked. The first boot takes up to 10 minutes.Введите
YES, когда скрипт спросит. Первая загрузка — до 10 минут. -
If it does not boot past the logoЕсли не грузится дальше логотипа
From the bootloader, install again with the stock boot ramdisk. Everything works except updates over the air:
Из bootloader поставьте ещё раз со стоковым ramdisk в boot. Работает всё, кроме обновлений по воздуху:
flash-all.bat --keep-data --legacy-boot
bash flash-all.sh --keep-data --legacy-boot
-
Root (optional)Root (по желанию)
Install
ksunext-manager.apkfrom the package.Поставьте
ksunext-manager.apkиз пакета.adb install ksunext-manager.apk
03UpdatesОбновления
Settings → System → System update, the same updater as on Phone (2). On Phone (1) updates over the air have not been verified yet. To reinstall keeping data, run the installer with --keep-data.
Настройки → Система → Обновление системы, тот же апдейтер, что на Phone (2). На Phone (1) обновления по воздуху ещё не проверены. Переустановка с сохранением данных — установщик с --keep-data.
04Known issuesОграничения
- The builds are in testing: expect rough edges.
- Updates over the air are not verified on Phone (1) yet.
- Ultra XDR in the camera is off.
- Play Integrity “device” checks fail with an unlocked bootloader.
- Сборки на тестировании: возможны недочёты.
- Обновления по воздуху на Phone (1) ещё не проверены.
- Ultra XDR в камере выключен.
- Проверки Play Integrity уровня «устройство» с разблокированным загрузчиком не проходят.
Found a problem or have a question? Write to our Telegram group; mention your phone and the build version.
Нашли проблему или есть вопрос? Пишите в нашу группу в Telegram, укажите телефон и версию сборки.
Lock it only on untouched stock firmware. With NothingExtended installed, a locked bootloader will not boot the phone. After going back to stock, first boot into the system and make sure everything works, and only then lock the bootloader.
Блокируйте его только на чистом стоке. С NothingExtended заблокированный загрузчик не загрузит телефон. После отката на сток сначала загрузитесь в систему и убедитесь, что всё работает, и только потом блокируйте загрузчик.
Back to stockВозврат на сток
Flash the full official Nothing OS 3.2 firmware with fastboot. The stock firmware is in the spike0en/nothing_archive archive on GitHub. Going back erases all data.
Прошейте полную официальную прошивку Nothing OS 3.2 через fastboot. Стоковые прошивки есть в архиве spike0en/nothing_archive на GitHub. Откат стирает все данные.
The firmware rewrites the bootloader too, so first unlock the critical partitions: boot the phone into the bootloader, run the command below and confirm on the phone. It erases the data, which going back does anyway. Without it the bootloader and the firmware are not written, and the phone may not boot.
Прошивка переписывает и загрузчик, поэтому сначала разблокируйте критические разделы: переведите телефон в bootloader, выполните команду ниже и подтвердите на телефоне. Данные она сотрёт, но при откате они стираются всё равно. Без этого загрузчик и прошивки не запишутся, и телефон может не загрузиться.
fastboot flashing unlock_critical
Skip it if it is done already: fastboot oem device-info shows Device critical unlocked: true.
Если уже сделано, пропустите: fastboot oem device-info показывает Device critical unlocked: true.